LK Underfloor Heating is the perfect choice for new builds and renovation.
A simple and smart system for underfloor heating in all environments
We have solutions for installation in wooden joists, embedding in concrete and for load-bearing floors.
LK Slotted Board EPS 16
On insulated load-bearing floors with LK Slotted Board EPS 16LK Slotted Board EPS 16 is the solution for anyone who is renovating a room with restricted height. The insulated, pre-grooved panel is only 16 mm thick and is installed over existing floors. The heating pipe loops are simply pushed into the panel grooves, which is entirely covered by a bonded aluminium plate; heat from the pipes is spread evenly across the entire floor surface, with little downward heat loss. Load bearing flooring is then installed directly on top of the panel. If, for example, you decide to lay tiles over the floor heating installation, the total installation height is only 26 mm.
- Ideal for renovation
- Cuts downward heat loss
- Suitable under all types of final flooring
- Low installation height: from 25 mm
LK CLIP-RAIL 16/20
Embedding in concrete with LK Clip-Rail 16/20
- For new-build and renovations
- Ideal for ground-slab or setting in screed
- Suitable under all types of surface flooring
- Installation height: 0 mm for new-build, 55 mm when laying on pre-insulated floor
Remote control heating and water with our app LK AtHome
Our LK AtHome app allows you to control and monitor your underfloor heating and water safety system via your mobile phone, tablet or computer. The app has a user-friendly interface that makes it easy to control and monitor all functions, for example raising or lowering the temperature or shutting off water remotely. If something goes wrong, the app will alert you by sending a push notice. Safe and secure.
LK AtHome is compatible with LK’s ICS.2 heating regulation system and the LK Water Safety System WSS, when the LK Webserver accessory is installed.