Hot water heat pump for outside air or recirculation mode. Optionally with an internal heat exchanger for connecting an external heat generator or solar collectors- High-performance values in fresh air and recirculation mode
- Easy commissioning thanks to the pre-assembled unit and preset control
- Quiet operation, comparable to a refrigerator
- Pre-assembled control unit for intuitive and easy operation
Key Benefits
- Prepared for the optimized consumption of self-generated electricity from photovoltaic systems
- SmartGrid capable
- Rapid heating function with electric immersion heater (scope of delivery for type T0E-ze, accessories for type T0S-ze)
- The drinking water is heated to 62 ° C via the heat pump module when the air temperature is above 5 ° C
- Future-proof HFO refrigerant R1234ze with very low greenhouse gas potential (GWP)
- Hot water heat pump for outside air or recirculation mode. Optionally with an internal heat exchanger for connecting an external heat generator or solar collectors
- High-performance values in fresh air and recirculation mode
- Easy commissioning thanks to the pre-assembled unit and preset control
- Quiet operation, comparable to a refrigerator
- Pre-assembled control unit for intuitive and easy operation
- Prepared for the optimized consumption of self-generated electricity from photovoltaic systems
- SmartGrid capable
- Rapid heating function with electric immersion heater (scope of delivery for type T0E-ze, accessories for type T0S-ze)
- The drinking water is heated to 62 ° C via the heat pump module when the air temperature is above 5 ° C
- Future-proof HFO refrigerant R1234ze with very low greenhouse gas potential (GWP)
Vitocal 060-A hot water heat pump
guarantees efficient hot water preparation in both new buildings and modernizations
The compact Vitocal 060-A heat pump in monobloc design is equipped with all the components for efficient DHW heating. In addition to the heat pump module, the space-saving housing contains a hot water storage tank and the control.
Vitocal 060-A hot water heat pump
guarantees efficient hot water preparation in both new buildings and modernizations
The compact Vitocal 060-A heat pump in monobloc design is equipped with all the components for efficient DHW heating. In addition to the heat pump module, the space-saving housing contains a hot water storage tank and the control.
Operating convenience
The Vitocal 060-A can use both the outside air and the circulating air to heat drinking water efficiently and cost-effectively. It is suitable for single-family homes in new and existing buildings.
The hot water heat pump is optionally available with a coil for monovalent operation or with an integrated coil for post-heating via a boiler or a solar system. The dry, very low-scaling electric heating element can be exchanged without emptying the storage tank (pre-assembled for type T0E-ze, accessories for type T0S-ze).
The Vitocal 060-A is operated with the HFO refrigerant R1234ze with a very low greenhouse gas potential (GWP).
Operating convenience
The Vitocal 060-A can use both the outside air and the circulating air to heat drinking water efficiently and cost-effectively. It is suitable for single-family homes in new and existing buildings.
The Vitocal 060-A can use both the outside air and the circulating air to heat drinking water efficiently and cost-effectively. It is suitable for single-family homes in new and existing buildings.
The hot water heat pump is optionally available with a coil for monovalent operation or with an integrated coil for post-heating via a boiler or a solar system. The dry, very low-scaling electric heating element can be exchanged without emptying the storage tank (pre-assembled for type T0E-ze, accessories for type T0S-ze).
The Vitocal 060-A is operated with the HFO refrigerant R1234ze with a very low greenhouse gas potential (GWP).
Optionally available for circulating or outside air
As a recirculation version, the Vitocal 060-A uses the air from the room in which it is installed. Part of the heat is extracted from the air that is drawn in and this is raised by the heat pump to a usable temperature level (up to 62 ° C in pure heat pump operation). Moisture is removed from the rooms. This protects the building fabric and increases the quality of living.
With the help of the outside air adapter (scope of delivery), the Vitocal 060-A can easily be switched to outside air mode. It works efficiently down to an outside temperature of -5 ° C. The Vitocal 060-A can be installed in rooms with a ceiling height of 2 meters or more, depending on the pipe system used for the outside and exhaust air.
Control variably adjustable
The Vitocal 060-A is immediately ready for use. However, these settings can be changed individually via the control unit. For example, the various operating programs Eco, Auto, Boost or Holidays can be set or the time program for hot water preparation can be changed.
In addition, if there is a higher demand for hot water, the tap profile can be changed from L to XL by an authorized specialist.
